Proget Integrated Auth Mixes Machine Name with User Account

arozanski_1087

Please excuse my delay, I accidentally caused myself AD issues that completely broke the server and made it so I could not go in and check my settings.

To answer your question, I'm using the Server directory where my servers reside, since they're in a different domain and network than the User Domain where the users reside. There's some crossover because I can look up principals in the other domain. Earlier this afternoon I was trying it out and I got one of the users to show up in the permissions screen, however when assigning permissions a few seconds later it reverted back to Machine Accounts.

rhessinger

Hi @arozanski_1087,

Do you have multiple LDAP directories configured?

Thanks,
Rich

arozanski_1087

I do not have multiple LDAP directories configured on my ProGet server. I only have the Server LDAP one configured.

rhessinger

Hi @arozanski_1087,

I didn't see this answer before, but are you using LDAP or Single Domain Active Directory (Legacy) or Active Directory (LDAP)?

Thanks,
Rich

arozanski_1087

I'm using Active Directory (LDAP). Within that configuration I only have 1 Domain listed, and only 1 DC hostname. There are not NetBios mappings, and I only have gMSA checked as an option. Search Mode is set to All Trusted Domains

rhessinger

Hi @arozanski_1087,

This is really peculiar because we have an explicit filter on all of our LDAP queries to be a user, msDS-GroupManagedServiceAccount, or group. Does each user account have their own group managed service account?

Thanks,
Rich

arozanski_1087

I verified this with our IT department: user accounts do not have their own gMSA. When I test the search feature it shows me the correct user in the dropdown when I select options. Further testing shows that when I explicitly look for any machine name account, it fails to find it. Truly peculiar.

atripp

Hello, we haven't seen this before, so it's a bit strange to diagnose.

Can you share exactly what version of ProGet you're using, as well as some screenshots showing the step-by-step? There are some subtle ways different things are displayed, and that might clue us in where to look next.

cheers,
Alana

arozanski_1087

Absolutely.

Im in the users and tasks menu adding a permission. Everything looks normal here.

It adds my machine account instead after I click save. Does this for every user in that domain.
.

rhessinger

Hoi @arozanski_1087,

Can you please tell us what version of ProGet you are running and also, can you please tell us what version of the InedoCore extension is installed on your ProGet instance?

Thanks,
Rich

arozanski_1087

Product Version: Version 5.3.15 (Build 2)
Extension Version: 1.7.10

rhessinger

Hi @arozanski_1087,

Thanks for sending that over. I took a look into the code and checked some things and I don't see anything that would look up the computer name. Can you look at the [Privileges] table in the ProGet database? Do the usernames include the $ in there also? Also, do you have any sort of reverse-proxy sitting in front of ProGet?

Thanks,
Rich

arozanski_1087

No Reverse-Proxy in front of my server.

RE: [Privileges]

My account is the only account in this user domain that I have explicitly specified, and it has a $ in the name.

Other data fields for my entry are as follows:

| PrincipalType_Code |  Role_Id | Feed_Id | PrivilegeType_Code | UserDirectory_Id |
|G                   |    4     | NULL	  |  G 	               | 6                |

I'm going to take a wild guess and assume then that the PrincipalType_Code value means group account, as actual user accounts show up with code U, and the actual group accounts which contain the users I want to have in the various roles also show up as G.

rhessinger

Hi @arozanski_1087,

You are correct. G is for group or gMSA. The only thing that makes sense is that your AD has a group or a gMSA for your user account with the same name and it is return the group first. You could manually change the DB record to remove the $ and that should then work. But that is an annoying manual step. Can you please verify that the user you are testing with does not have a Group of gMSA named as AROZANSKI$ in AD?

Thanks,
Rich

arozanski_1087

@rhessinger absolutely. my IT team tells me no, and I am in AD looking at the account via Active Directory Users and computers and I do not find anything. I can confirm without a doubt that there isn't a gMSA for this user.

rhessinger

Hi @arozanski_1087,

I apologize for all the back and forth I'm struggling a bit to recreate this issue. I have even tried to just add a computer by searching it by name and I still cannot recreate this. Would you be able to perform a test search in the Advanced Settings of your Active Directory provider? Does that also return the computer accounts?

Thanks,
Rich

arozanski_1087

My searches were all done in the advanced search window, and that did not return computer accounts. I also tried in active directory to just look up computer accounts (instead of users) and couldn't return any.

rhessinger

Hi @arozanski_1087,

I think I may have finally tracked this issue down. Would you be able to manually install the Inedo Core 1.7.11-CI.1 extension and see if that fixes your issue? There is one spot that does not properly apply the user and group filter upon saving and I'm thinking I may have fixed it.

Thanks,
Rich

arozanski_1087

Trying to install it, but it causes this error when I load the web portal:

[InvalidCastException: Unable to cast object of type 'System.Byte[]' to type 'System.String'.]
   Inedo.Extensions.UserDirectories.Entry.ExtractGroupNames() +260
   Inedo.Extensions.UserDirectories.ActiveDirectoryUser.IsMemberOfGroup(String groupName) +120
   System.Linq.WhereArrayIterator`1.MoveNext() +71
   System.Linq.Buffer`1..ctor(IEnumerable`1 source) +492
   System.Linq.<GetEnumerator>d__1.MoveNext() +116
   System.Linq.Buffer`1..ctor(IEnumerable`1 source) +281
   System.Linq.Enumerable.ToArray(IEnumerable`1 source) +90
   System.Collections.Concurrent.ConcurrentDictionary`2.GetOrAdd(TKey key, Func`2 valueFactory) +87
   Inedo.ProGet.Web.Security.TaskChecker.FindPrivilege(IUserDirectoryUser user, ScopedTask& scopedTask) +42
   Inedo.Security.UserContext.CanPerformTask(ScopedTask& task) +162
   Inedo.ProGet.WebApplication.Security.WebUserContext.IsAuthorizedForTask(ProGetSecuredTask task, Nullable`1 feedId) +199
   Inedo.ProGet.WebApplication.Pages.RootPage.CreateTopPanel() +1006
   Inedo.ProGet.WebApplication.Pages.<CreateChildControlsAsync>d__2.MoveNext() +871
   System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw() +31
   System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task) +60
   Inedo.ProGet.WebApplication.Pages.<InitializeAsync>d__10.MoveNext() +621
   System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw() +31
   System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task) +60
   Inedo.Web.PageFree.<ExecutePageLifeCycleAsync>d__46.MoveNext() +234
   System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw() +31
   System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task) +60
   Inedo.Web.PageFree.<ProcessRequestAsync>d__45.MoveNext() +240
   System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw() +31
   System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task) +60
   System.Web.TaskAsyncHelper.EndTask(IAsyncResult ar) +59
   Inedo.Web.Handlers.AsyncHandlerWrapper.EndProcessRequest(IAsyncResult result) +33
   System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +648
   System.Web.HttpApplication.ExecuteStepImpl(IExecutionStep step) +213
   System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +131

I've rolled it back by deleting the .upack file i added to the /Extensions folder and restoring the one I had put in the recycle bin, but I'm still facing this error.

rhessinger

Hi @arozanski_1087,

Did you restart IIS or the Integrated Web Server after copying the upack file back? Also, did your upack file have a version number in the name? Or was it just InedoCore.upack? I doubt this, but can you navigate directly to /administration/extensions? Could you also take a screen shot of the files in the Extensions folder?

Thanks,
Rich