ProGet 2023 Data Migration fails with database timeout

martijn_9956

I'm profiling the migration right now to see if I can figure out what it's timing out on. Meanwhile, I noticed that the SP Executions_AddLogEntry is rather slow, between 10ms and 130ms. Is this expected or should I just empty part of my ScopedExecutionLogEntries table, since I have logs going back to 2018?

I'll post again once the migration has failed again with my findings.

atripp

@martijn_9956 thanks, let us know what you find! That is really slow for Executions_AddLogEntry; it's just an insert I think.

Can you check... what is the database recovery model for ProGet configured to? It should be SIMPLE. Not sure if that would make a difference or not, just a thought...

martijn_9956

@atripp

The recovery model was set to FULL.. I just changed it to SIMPLE and started a new run, but it doesn't really seem to have any impact, oh well.

As for my profiling:

FeedPackages_UpdatePackageData ended up timing out right at the 10 minute mark, as expected. I did however pull the entire @p2 temporary table from the profiler and used it to run some local tests.

Running the SP on my much beefier Windows 11 Pro desktop on SQL Server 2022, using a database backup from last night, stills ends up with an execution time of a solid 2 minutes, so I'm starting to suspect it's something in the database itself. The columns seem properly indexed though, so that's kinda odd..

I'll try some adjustments to the SP and see if I can figure something out.

atripp

Thanks so much for the update @martijn_9956; even 2 minutes that is a surprising amount of time to take for what should be a really basic insert/update

But I'm glad you could repro it to the proc; we can also take a stab at playing around with the procedure as well if you us the script you're running.

And just to confirm -- you were seeing that @p2 temporary was only around 1658 rows, right? That's what I would expected based on the log messages. I know we tested this with 10k+ rows at least.

martijn_9956

@atripp Yup, we get 1658 insert statements into @p2 that are then passed onto the SP.

martijn_9956

Ended up getting rid of the MERGE statement and replacing it with a simple UPDATE & INSERT:

USE [ProGet]
GO
/****** Object:  StoredProcedure [dbo].[FeedPackages_UpdatePackageData]    Script Date: 25-07-2023 11:43:34 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO

ALTER PROCEDURE [dbo].[FeedPackages_UpdatePackageData]
(
	@Feed_Id INT,
	@Packages_Table dbo.[FeedPackageEntry] READONLY,
	@DeleteMissing_Indicator YNINDICATOR = 'N'
)
AS
BEGIN

DECLARE @queryStart AS VARCHAR(max) = CONVERT(varchar, SYSDATETIME(), 121);
PRINT @queryStart;
BEGIN TRY
	BEGIN TRANSACTION;

	SELECT [PackageName_Id] INTO #existingPkgIds FROM [FeedPackages] WHERE [Feed_Id] = @Feed_Id;

	PRINT 'update';
	UPDATE [FeedPackages]
	SET [FeedPackages].[Latest_Package_Version] = old.[Latest_Package_Version],
		[FeedPackages].[LatestStable_Package_Version] = old.[LatestStable_Package_Version] FROM @Packages_Table old WHERE [FeedPackages].PackageName_Id = old.PackageName_Id;

	PRINT 'insert'
	INSERT INTO [FeedPackages] SELECT @Feed_Id,
			[PackageName_Id],
			[Total_Download_Count],
			[Latest_Package_Version],
			[LatestStable_Package_Version] FROM @Packages_Table old
			WHERE [PackageName_Id] NOT IN (SELECT [PackageName_Id] FROM #existingPkgIds);
			-- insert all new packages not already in table

	COMMIT
END TRY BEGIN CATCH
	IF XACT_STATE()<>0 ROLLBACK
	EXEC [HandleError]
END CATCH
DECLARE @queryEnd AS VARCHAR(max) = CONVERT(varchar, SYSDATETIME(), 121);
PRINT @queryEnd;
END

My SQL skills are a bit rusty but I make do.
This runs on my desktop in about 3 seconds.

Note that this does not account for updating download statistics (I don't really care about those) or deleting orphaned packages, but I figure that's easy enough to add back later. I removed those from the MERGE earlier today and it didn't have any impact so I don't think the issue lies there.

I compared the resulting table from this SP with the resulting table of the original SP and they are identical, I'm going to replace the SP on the server with this and see how it goes!

martijn_9956

@atripp Success!

I'm now migrating the NPM feed which I expect will work just as well.

martijn_9956

And NPM completed succesfully as well :)

atripp

Thanks so much @martijn_9956; after researching the matter further, it seems that the MERGE can be a pretty buggy statement, and its behavior seems to vary based on the operating system, SQL Server SKU, patch version, and probably the phase of the moon.

We will rewrite this procedure to use a more straight-forward UPDATE/INSERT/DELETE (like you did) via PG-2437, which will ship in next maintenance release.

Evan_Mulawski_8840

I just encountered this on 2023.18. Any way to re-run this?

DEBUG: 2023-09-18 16:05:38Z - Deactivating feed...
INFO : 2023-09-18 16:05:38Z - Importing legacy data for npm (Npm) feed...
ERROR: 2023-09-18 16:06:46Z - Error importing data: Microsoft.Data.SqlClient.SqlException (0x80131904): Execution Timeout Expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
 ---> System.ComponentModel.Win32Exception (258): The wait operation timed out.
   at Microsoft.Data.SqlClient.SqlCommand.<>c.<ExecuteDbDataReaderAsync>b__209_0(Task`1 result)
   at System.Threading.Tasks.ContinuationResultTaskFromResultTask`2.InnerInvoke()
   at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state)
--- End of stack trace from previous location ---
   at System.Threading.Tasks.Task.ExecuteWithThreadLocal(Task& currentTaskSlot, Thread threadPoolThread)
--- End of stack trace from previous location ---
   at Inedo.Data.DatabaseContext.DbResult.CreateAsync(DbCommand command, DatabaseContext context, DateTimeOffset startTime, Stopwatch stopwatch)
   at Inedo.Data.DatabaseContext.ExecuteInternalAsync(String storedProcName, GenericDbParameter[] parameters)
   at Inedo.Data.SqlServerDatabaseContext.ExecuteInternalAsync(String storedProcName, GenericDbParameter[] parameters)
   at Inedo.Data.DatabaseContext.ExecuteNonQueryAsync(String storedProcName, GenericDbParameter[] parameters)
   at Inedo.ProGet.Feeds.StandardPackageFeed`3.ImportLegacyPackageDataAsync[TOldRow](ImportLegacyPackageDataContext context, IEnumerable`1 oldRows, Func`2 importAsync, CancellationToken cancellationToken)
   at Inedo.ProGet.Feeds.Npm.NpmFeed.Inedo.ProGet.Feeds.ILegacyImportableFeed.ImportLegacyPackageDataAsync(ImportLegacyPackageDataContext context, CancellationToken cancellationToken)
   at Inedo.ProGet.Executions.MigrateFeedsForProGet23Execution.ExecuteAsync(IManualExecutionContext context)
ClientConnectionId:58ed9c81-5e72-4dd3-808a-612492ad0b86
Error Number:-2,State:0,Class:11
DEBUG: 2023-09-18 16:06:46Z - Deactivating feed...
INFO : 2023-09-18 16:06:46Z - Importing legacy data for nuget (NuGet) feed...
INFO : 2023-09-18 16:06:47Z - Migrating legacy .snupkg tables...
INFO : 2023-09-18 16:06:47Z - .snupkg migration complete.
DEBUG: 2023-09-18 16:06:47Z - Reactivating feed...
INFO : 2023-09-18 16:06:47Z - Import complete for nuget feed.

Evan_Mulawski_8840

In case anyone runs into this issue, stop the web app (i.e. stop the app pool) and create a new execution:

USE [ProGet]
GO

DECLARE @RC int
DECLARE @Start_Date datetime
DECLARE @ExecutionMode_Code char(1) = 'O'
DECLARE @ExecutionRunState_Code char(1)
DECLARE @ExecutionType_Name varchar(50) = 'ProGet 2023 Feed Data Migration'
DECLARE @Execution_Configuration xml = (select Execution_Configuration from dbo.Executions where Execution_Id = <ID_OF_FAILED_EXECUTION>)
DECLARE @ScheduledTask_Id int = NULL
DECLARE @Feed_Id int = NULL
DECLARE @Connector_Id int = NULL
DECLARE @FeedReplication_Id int = NULL
DECLARE @Execution_Id int

EXECUTE @RC = [dbo].[Executions_CreateExecution] 
   @Start_Date
  ,@ExecutionMode_Code
  ,@ExecutionRunState_Code
  ,@ExecutionType_Name
  ,@Execution_Configuration
  ,@ScheduledTask_Id
  ,@Feed_Id
  ,@Connector_Id
  ,@FeedReplication_Id
  ,@Execution_Id OUTPUT
GO

dean-houston

Hi @Evan_Mulawski_8840 ,

That particular bug may be resolved by running the patch script attached to this upcoming change: https://inedo.myjetbrains.com/youtrack/issue/PG-2484

As for retrying the migration; there will be a button on the ProGet root page if there is a failed/incomplete migration (/) that allows you to retry it. This will open to the /retry-migration URL, which I would recommend using instead of a database insert.

Best,
Dean